Béton Ciré Guard Protect - Water and oil repellent protection - Guard Industrie

Béton Ciré Guard Protect - Water and oil repellent protection - Guard Industrie

Ciré Concrete Guard Protect protects treated interior floors against the penetration of water , greasy stains and dirt from everyday life (wine, oil, coffee, etc.).
The treatment thus delays the re-clogging of the support and greatly facilitates its maintenance.

Ciré Concrete Guard Protect is an impregnation product, the support remains permeable to air and water vapor.
The product gives the treated surface a shiny waxed effect and thus enhances the original color.
In addition, it is perfectly UV resistant and does not yellow over time.

Advantages

• Prevents water and fatty liquids from penetrating.
• Anti-stain, anti-dirt and non-stick.
• Makes cleaning easier.
• Let the support breathe.
• Enhances color.
• Applies horizontally and indoors.
• Ready to use.
• Perfectly UV resistant.
• Does not yellow over time.

Use

• Used on fine smoothed concrete slabs, fine smoothed self-leveling cement screeds or leveling surfaces
• Floors
• New or old
• Interior
• Offices, public spaces with moderate traffic, floors of individual houses…

Implementation

Preparation of the support

1. Apply the product to a clean, dust-free and dry surface.
2. Shake the packaging carefully before each use and carry out a preliminary test.

Application

1. Always start in a back corner of the room and move back as you go.
2. Apply in 2 to 3 pure coats.
3. Moisten the tool with water and spread a first layer of product by pressing it.
4. Spread the product thinly, forming figures of 8 with the application tool.
   Always overlap the previous passage by about 5 cm.
5. Smooth the surface with the tool to standardize the product (remove overcoats and fill in gaps).
6. Apply a 2nd coat in the same way as the 1st coat.
7. Minimum drying time between each pass: 1 hour at 20°C.
8. Respect the recommended consumption (6 to 8 m2/l).
9. If necessary apply a 3rd coat.

Application tools

Apply preferably using a microfiber flat broom or a dampening muff.
Always use a clean tool dedicated to this product.

Consumption

6 to 8 m²/L in 2 or 3 layers.

Conditioning

5L