Sika FastFix-1 TP - Mortar for bonding curbs and directional islands - Sika

Sika FastFix-1 TP - Mortar for bonding curbs and directional islands - Sika

Sika FastFix-1 TP is a fast- curing , one-component hydraulic mortar .

Features / Advantages

• Excellent adhesion to concrete and bituminous asphalt.
• Good resistance to hydrocarbons.
• Quick return to service.
• Allows for adjustment of the support's planimetry.
• Good resistance to freeze/thaw cycles.

Areas of application

• Bonding of curb edges, in concrete or stone.
• Bonding of concrete or stone road elements (directional islands, flower boxes, street furniture, etc.).
• Edge joints.

Application

1. Spread Sika FastFix-1 TP with a trowel or notched float to a thickness of approximately 5 to 10 mm (in order to obtain a final thickness of 3 mm).
2. Position the elements to be glued onto the mortar.
3. Adjust using a rubber mallet and a ruler.
4. Immediately remove any excess glue protruding from the road element.
5. After 1 hour at 20°C, fill the joints between the elements with Sika FastFix-1 TP.
6. Use freshly mixed mortar.

Consumption

It depends on the roughness of the substrate as well as the thickness of the layer applied: 2.2 kg/m²/mm of thickness (i.e. 1.9 kg of powder + 0.3 litre of water).

Packaging

25 kg bag

FAQ - Frequently Asked Questions

1. Is this mortar suitable for outdoor use?
   Yes, Sika FastFix-1 TP is specially designed for outdoor use and is resistant to weathering, frost and climatic variations.
2. Can it be used for heavy edging?
   Yes, thanks to its high mechanical resistance, it is perfectly suited for curbs and road elements subjected to heavy loads.
3. Is the product compatible with an asphalt surface?
   Yes, Sika FastFix-1 TP offers excellent adhesion to asphalt, concrete and similar mineral substrates.
4. How long does it take before it can be put back into service?
   The connection is quick. Recommissioning can usually take place after a few hours, depending on the temperature and site conditions.
5. Is it necessary to use a bonding primer?
   In most cases, no primer is necessary if the surface is clean and properly prepared.
6. Is it possible to work in cold weather?
   Yes, the product is suitable for outdoor conditions, but it is recommended to respect the application temperatures indicated by the manufacturer.
7. Is this product suitable for individuals?
   It is primarily intended for professionals, but can be used by knowledgeable individuals with the appropriate equipment.