Stainless steel drainage channel, 2 cm high - 2XSDRAIN EASY Aluminum grate - LINE ECO

Stainless steel drainage channel, 2 cm high - 2XSDRAIN EASY Aluminum grate - LINE ECO

The 2XSDRAIN ESAY ECO LINE is a super mini channel consisting of a stainless steel channel and an aluminum grate.

Uses: To meet technical constraints regarding space for installing drainage channels, pipe passages, concrete, steel, etc.

Quality: 316 stainless steel - A4, ideal for outdoor use, marine environments, swimming pools, etc.

HYPER MINI 2XS HEIGHT: 20 mm

This drainage channel is installed around the house, where there is no car traffic.

You can drain water from the gutter, for example, to the sewer or an infiltration system, using a lower drainage outlet. By draining the water to an infiltration system, you also take sustainable action and improve the soil's moisture balance. PIERRE & SOL offers Gully infiltration soakaways and other models.

This drainage channel has an optional bottom outlet. The bottom outlet must be connected to the mains drainage system. To install the bottom outlet, drill a 45 mm diameter hole in the bottom of the channel using a stainless steel hole saw. See HERE .

Benefits :

• Extremely low height 2 cm - 20 mm
• A discreet and elegant drainage solution for the terrace.
• Durable stainless steel drainage channel element.
• Easy to install.
• Grille easily removable.
• Only 6.5 cm in external width.
• Resistance class A 15 (pedestrian only).

Dimensions:

Gutter:

• Length: 1 m (or 50 cm on request)
• External width: 6.5 cm
• Height: 2 cm

Corner element in 2 pieces: (Made to order)

• Length: 15.9 cm
• External width: 6.5 cm
• Height: 2 cm

T-shaped piece in 2 parts: (Made to order)

• Length: 18.2 cm / 15.7 cm
• External width: 6.5 cm
• Height: 2 cm

Advice :

• If the flooring is new, we recommend stretching a string to determine the level. When doing this, always place the grid 3 mm below the string.
• If you are placing the gutter in an existing surface, we recommend making a wooden template of the desired height for leveling.
• If the gutter is laid along a vertical wall, the edge of the joining piece must be cut out on that side.

Attention :

Connect a maximum of 6 meters of 2XS drainage channels to a single lower opening.

Prevent odors by installing a siphon at the sewer connection.

Accessories available separately, SEE THIS PAGE

FAQ - Frequently Asked Questions

1. Is a 2cm drainage channel compatible with a terrace on pedestals?
   Yes, it can be integrated into the edge of a terrace on pedestals, but it is not designed to be placed under the slabs. It must be placed on a stable surface or in a designated recess.
2. Can the aluminum grille withstand the weight of a car driving over it?
   No, the LINE ECO grate is designed for pedestrian use. For vehicular traffic, choose a reinforced model in stainless steel or cast iron.
3. Is the drainage channel suitable for swimming pools?
   Yes, thanks to its stainless steel structure and low height, it is perfect for pool decks, wet terraces and runoff areas.
4. What slope should be planned before the gutter?
   A slope of 1 to 2% is recommended to optimize water flow.
5. How to maintain the gutter? Simply remove the (removable) grate, then clean: leaves, mud, runoff residue. A rinse with water is sufficient in most cases.
6. Is the gutter frost-resistant?
   Yes, stainless steel and aluminum are perfectly resistant to frost and weathering.
7. Can several drainage channels be connected together?
   Yes, the EASY system allows for modular installation: several sections can be aligned to create linear drainage over the entire desired length.