Remover for silicone sealants 100 ml - HG

Remover for silicone sealants 100 ml - HG

This silicone remover very easily removes silicone joints from various supports, including stainless steel , enamel , glass , different types of synthetic materials , ceramic tiles , varnished tiles , natural stone and other similar supports.

• Even for the toughest sealants.
• Acts in 15 minutes.
• Does not attack other materials.
• Brush and spatula included.

Removing a silicone seal is often an unpleasant job.

Many other types of sealants , such as butylene , acrylate or universal sealants leave streaks that are difficult to remove - but not with this silicone sealant remover.

This silicone remover is great for removing old sealants and removes even the toughest sealants .

Manual :

We advise you to first test the silicone remover in an inconspicuous place. Do not apply the product on porous substrates. Before applying a new putty, the surface must be completely dry.

1. Start by removing the putty to be eliminated by cutting it with a knife flush with the surface to be cleaned.
2. Carefully protect the sealant that you do not want to remove with adhesive tape.
3. Generously apply HG silicone sealant remover to the remaining sealant using the brush supplied with the product. Leave on for 15 minutes.
4. Remove the remains of mastic with the spatula included in the package. If this does not happen easily, extend the action time.
5. Finish by ridding the support of the last remnants of the silicone solvent by rinsing with water, possibly using a small (nail) brush or a clean cloth.
6. If necessary, repeat the operation.

Consumption :

• 10 to 15 linear meters for 100 ml of product.