SikaCeram-290 StarLight - Multiflow tile adhesive - Sika

SikaCeram-290 StarLight is a multiflow, deformable, low dust, single component tile adhesive.

1 Item
€46.12Tax Included

Volume discounts

QuantityYou SaveUnit price
55 %€43.81
1510 %€41.50
4215 %€39.20
SIK 478330
7612895159034

SikaCeram-290 StarLight - Multiflow tile adhesive - Sika

SikaCeram-290 StarLight is a deformable, single-component adhesive mortar , composed of cements with high mechanical strength, a high polymer content, selected silica/quartz fillers and specific additives.

This tile adhesive is suitable for making deformable layers up to 15 mm thick.
Suitable for laying porcelain stoneware and natural stone on facades , heated floors , swimming pools and industrial floors.

Features

  • Multiflow: adhesive mortar possible in thin or fluid installation
  • High coverage (up to 80% more coverage, compared to normal tile adhesive)
  • Low dust emission
  • Recycled raw materials
  • Deformable
  • No vertical slip
  • Extended open time

Application areas

SikaCeram-290 StarLight is suitable for bonding the following types of tiles:

  • All types of ceramic tiles, even large size stoneware porcelain and thin slabs
  • Installation of marble and other natural stones, as long as they are not sensitive to water.

SikaCeram-290 StarLight can be used indoors and outdoors, on floors and walls, on the following supports:

  • Cement and gypsum base
  • Existing sound ceramic tiles or stones, paint, indoors
  • Existing sound PVC sheet floors, linoleum and vinyl tiles, indoors.

SikaCeram-290 StarLight is suitable for applications requiring high performance, such as:

  • swimming pools
  • Laying on heated floors (hydraulic and electrical systems)
  • Industrial and heavy-duty floors
  • facades
  • Spot bonding of polystyrene, polyurethane foam, rock wool or glass wool insulation panels

Application

  1. SikaCeram-290 StarLight is applied with a notched trowel.
  2. The amount of product must be sufficient to completely coat the back side of the tiles.
  3. Tiles should be laid over freshly applied adhesive, applying adequate pressure to ensure full and even contact with the adhesive and therefore optimum adhesion.
    If a film seems to form on the surface, the glue has not been used for too long; if this happens, immediately remove the layer of adhesive with a trowel, discard this material and apply a fresh layer of SikaCeram-290 StarLight adhesive.
  4. Avoid application in direct sunlight and/or in high winds/draughts.
  5. SikaCeram-290 StarLight is specifically designed as an ideal product for laying non-absorbent tiles, indoors, with no limits on tile size or support.
    Outside, it is preferable to lay non-absorbent tiles with a size of less than 10000 cm2 (e.g. 100 x 100 cm) for floors, and 7000 cm2 (e.g. 80 x 80 cm) for walls without the aid of a mechanical fastener.
    These limits are valid for cement-based, non-heating substrates.
  6. For laying tiles larger than 900 cm² (eg 30 x 30 cm), it is always recommended to apply the technique of laying by double gluing.

Consumption

Consumption is a function of the surface profile and the roughness of the substrate, the size of the tiles and the laying technique (gluing on one side or double-sided).
As an indication, in kilograms of powder per m²:

  • Small tiles/6 mm notched trowel: ~ 1.3 kg/m²
  • Normal tiles/8 mm notched trowel: ~ 1.6 kg/m²
  • Large tiles/notched trowel 10 mm: ~ 2.0 kg/m²

Conditioning :

15 kg bag in Grey.

Sika
SIK 478330
1 Item

Data sheet

Signal word
DANGER
Hazard statements
H315 – Causes skin irritation.
H318 – Causes serious eye damage.
H335 – May cause respiratory irritation.
Hazard pictogram
Hazard pictogram : GHS05 - Corrosive GHS05 - Corrosive
Hazard pictogram : GHS07 - Harmful GHS07 - Harmful
 

Specific References

EAN13
7612895159034
There are no reviews for this product yet.

You might also like

Customers who bought this product also bought: