SikaCeram-270 MultiFlow - Mortar for variable use - Sika

SikaCeram-270 MultiFlow - Mortar for variable use - Sika

SikaCeram® - 270 MultiFlow is a mortar-glue pre-mix-component, high recovery, deformable, fast curing, with light loads, consisting of cement with high mechanical resistance, high polymer content, mineral load selected silica/quartz and specific additives.

This tile glue suitable for deformable layers up to 30 mm thickness.

Suitable for: laying porcelain stoneware and natural stone on the facades, heating floors, swimming pools, industrial floors and highly stressed soils.

Areas of application:

SikaCeram® - 270 MultiFlow is suitable for gluing of tiles following types:

• All types of floor tiles ceramic, even porcelain stoneware of great size.
• Fine porcelain stoneware slabs.
• Walls and floors inside.
• Marble and natural stone, as long as these materials are not sensitive to water.

SikaCeram® - 270 MultiFlow can also be applied on floors and walls inside and out, including:

• Pools, industrial floors and soils highly solicited, facades.
• Heating floors (hydraulic and electrical systems).
• Collection of old tiles inside, with the Sika® Primer-21 W.
• Collage by points of polystyrene insulation boards, foam polyurethane, mineral wool or glass wool

Features / benefits:

• MultiFlow: thin layer until fluid consistency.
• Deformable.
• Fast curing.
• The vertical sliding resistance.
• Extended open time.
• Emissions of VOCs; class EC1PLUS (very low)

Packaging:

Bag of 25 kg.

Appearance / color:

Gray powder

Consumption

Consumption is a function of the profile surface and roughness of the support, the size of the tiles and the application technique (sticking to one side or double-sided).

As an indication, in kilograms of powder per m²:

• Trowel notched 6 mm ~ 2.1 kg/m²
• Notched trowel 8 ~ 2.5 kg/m²
• Notched trowel 10 ~ 2.9 kg/m²

Conservation

started 6 months from the date of production if stored in the sealed, no original packaging and undamaged, in a fresh and dry law.