Combibox Soudafoam X-tra C&F - High-performance CE 1 PLUS PU foam - Soudal

Combibox Soudafoam X-tra C&F - High-performance CE 1 PLUS PU foam - Soudal

The Soudafoam X-TRA Combibox is a set of 9 Soudafoam X-TRA Click & Fix gunable aerosols , 1 Click & Fix gun and 1 Click & Clean cleaner .
EC 1 PLUS label: very low VOC emissions .

Features :

• Excellent shape stability (no shrinkage or post-expansion)
• High filling efficiency
• Excellent adhesion to all surfaces, except PE/PP/PTFE
• Excellent thermal and acoustic insulation
• Excellent features for mounting
• Not resistant to UV rays
• Freon-free (harmless to the ozone layer and the greenhouse effect).
• EC 1 PLUS label: very low VOC emissions .

Applications:

• Cavity filling
• Installation and repair of ridge tiles
• Application of a silent layer
• Optimizing insulation in the refrigeration sector
• Installation of windows and doors in accordance with the manufacturer's specifications.

Instructions for use:

1. Shake the aerosol can well for 30 seconds.
2. Thanks to the unique (patented) Click & Fix fixing system, you simply need to turn the aerosol a quarter turn on the gun.
3. Adjust the flow rate of the gun (with the screw at the back), then pull the trigger.
4. Only partially fill the gaps, as the foam will continue to expand.
5. Shake the aerosol can regularly during use.
   If applying multiple coats, dampen the surface between each coat.
6. Traces of foam that are not yet dry can be cleaned with Soudal Click & Clean.
7. Hardened foam can only be removed mechanically, with Soudal PU-remover.
8. The aerosol can be stored for later use; in this case, leave the gun on the aerosol.
9. At the end of the work, thoroughly clean the inside of the gun with Soudal Click & Clean.
10. Properly moistening the substrate accelerates drying and improves the cellular structure of the foam.
11. Preferably store upright.

Content :

• 9 x Soudafoam X-TRA Click & Fix Gun-Fix Aerosols
• 1 x Click & Fix Gun
• 1 x Click & Clean cleaner.

FAQ - Frequently Asked Questions

1. What is the difference between a classic PU foam and Soudafoam X-tra?
   X-tra technology allows for up to 50% more yield and a denser cell structure for better insulation and more controlled expansion.
2. Can it be used with a PU foam gun?
   Yes, that's the whole point of the Combi (C&F) format. Usable with a gun. Usable with a nozzle.
3. Can the foam be applied to all surfaces?
   The foam adheres to most materials, concrete, stone, wood, PVC, aluminum, plaster… It does not adhere to PE, PP, PTFE (Teflon) or silicone.
4. Should the surfaces be moistened before application?
   Yes, a slightly damp surface improves expansion and hardening. The foam hardens thanks to the moisture.
5. Can the foam be painted after it has dried?
   Yes, once hardened, the foam can be cut, sanded and painted.
6. How long does it take for the foam to dry completely?
   Skin formation is very rapid (a few minutes). Complete hardening can vary from 6 to 24 hours depending on temperature and humidity.
7. Is the foam weather-resistant?
   Once hardened, the foam is resistant to moisture and temperature variations. However, it must be protected from UV rays, which can degrade it over time.
8. What are the advantages for a building professional?
   Quick and clean application. Superior coverage. Product savings. CE 1 PLUS certified. Suitable for indoor/outdoor use. Ideal for windows, frames, insulation, and repairs.
9. Is this foam suitable for installing doors and windows?
   Yes, that's one of its main applications. To seal window and door frames with optimal insulation and controlled expansion.